{MAINCONT}

Renault Clio: Interior Equipment

READ NEXT:

 Dashboard: Removal - Refitting

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: (see Airbag and pretensioners: Prec

 Dashboard: Stripping - Rebuilding

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: (see Airbag and pretensioners: Prec

 Centre console: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the trim (1). Unclip the gear lever trim. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (2). Push the seats forward as far

SEE MORE:

  Oil pressure sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Remove the engine undertray. Unclip the connector cover (1). Remove the oil pressure sensor

  Oil level sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Move the air inlet hose to one side. Disconnect the connector from the oil level sensor. II - OPERATION FOR REMOVAL OF PART CONCERNED Rem

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0036