Renault Clio: Exterior Protection

READ NEXT:

 Front bumper: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR392, 02, Lifting equipment). Remove: the lower bolts (1). the front pa

 Front bumper: Stripping - Rebuilding

EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5, and DOCUMENTATION PHASE 1 STRIPPING I - STRIPPING PREPARATION OPERATION Remove the f

 Rear bumper: Removal - Refitting

EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5, and DOCUMENTATION PHASE 1 - EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUI

SEE MORE:

 Solenoid valves: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: Before removing the solenoid valves, always mark their respective connectors in order not to mix them up. IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the acc

 Engine cooling: Parts and consumables for the repair

INGREDIENT Coolant GLACEOL RX (TYPE D) Note: Ready-to-use coolant or antifreeze must be diluted with distilled water in accordance with the guidelines marked on the container. Engine cooling: Precautions for the repair IMPORTANT The circuits are designed to be pressurized, so be careful at high temp

© 2016-2025 Copyright Renault Clio Owners Club