Renault Clio manuals
{MAINCONT}

Renault Clio: Cylinder head: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Top And Front Of Engine / Cylinder head: Removal - Refitting

READ NEXT:

 D4F, and 740 or 742 or 764

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitt

 K4J or K4M

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine cover, the engine undertray bo

 K9K, and 764 or 772

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine cover, the engine undertray,

SEE MORE:

  D4F, and 784, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the dashboard side face (1). Remove: the protective strips from the lower cover (2), the bolts (3), the lower cover (4), disconnecting the various connectors. Position the vehicle on a two-post lift (see Vehicle: Towing and lifting

  Vacuum pump: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the engine covers, the air filter duct. II - OPERATION FOR REMOVAL OF PART CONCERNED Undo the vacuum pump retaining bracket bolt (3). Remove: the hose (1) connected to the brake servo, the pipe (2), the vacuum pump bolts (4)

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0038