{MAINCONT}

Renault Clio: Top And Front Of Engine

READ NEXT:

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid val

 Accessories belt: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).

 Crankshaft accessories pulley: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the fron

SEE MORE:

  Sill panel extension: Removal - Refitting

EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (1). Detach the decorative strip (2). Note: Replace the decorative strip (2) every time it is removed. Remove the bolts (3). Detach the double-sided tape (4) using the (Car.1

  Dashboard: Removal - Refitting

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: (see Airbag and pretensioners: Precautions for the repair) (88C, Airbag and pretensioners), (see Vehicle: Precautions for the repair)

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0064