Renault Clio manuals

Renault Clio: Wheels And Tyres

Renault Clio III (2005-2013) Service Manual / Chassis / Wheels And Tyres

READ NEXT:

 Wheel: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG The removal - refitting procedure

 Wheel: Balancing

I - PREREQUISITES FOR WHEEL BALANCING Wheel balancing is a measurement operation. Several conditions must be met to achieve a reliable result in a single operation. The wheel balancer must be in

 Tyres: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the wheel in question (see 35A, Wheels and ty

SEE MORE:

 Gear control: List and location of components

JH3 or JR5 Press at " A " to separate the gearbox control cables from the anchoring ball joint on the gearbox Press at " B " to separate the gearbox control cables from the sheath stops on the gearbox TL4 Note: The external control of the TL4 gearbox has an adjusting system (3) on the se

 K9K, and JH3 or JR5 - K9K, and 772, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING During this operation, secure the vehicle to the lift with a safety strap(s), to prevent it from becoming unbalanced. To fit the strap

© 2016-2025 Copyright Renault Clio Owners Club