{MAINCONT}

Renault Clio: Wheels And Tyres

READ NEXT:

 Wheel: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG The removal - refitting procedure

 Wheel: Balancing

I - PREREQUISITES FOR WHEEL BALANCING Wheel balancing is a measurement operation. Several conditions must be met to achieve a reliable result in a single operation. The wheel balancer must be in

 Tyres: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the wheel in question (see 35A, Wheels and ty

SEE MORE:

  Tailgate spoiler: Removal - Refitting

K85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove: the blanking covers (1), the nuts (2). Unclip the tailgate spoiler at (3). Disconnect: the high level brake light connector, the rear screen washer jet pipe. Remove the tailgate spoiler. REFITTING I - REFITTING PRE

  Scoop under the scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the scuttle panel grille (see 56A, Exterior equipment, Scuttle panel grille: Removal - Refitting, 56A-1). Remove the trim under the scuttle panel grille (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the bolts (2), the blanki

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0041