Renault Clio: Front Seat Frames And Mechanisms
Renault Clio III (2005-2013) Service Manual / Trim And Upholstery / Front Seat Frames And Mechanisms
- Front seat base frame: Removal - Refitting
- Front seatback frame: Removal - Refitting
- Front seat runner: Removal - Refitting
- Front seat height adjuster control: Removal - Refitting
- Front seat height adjustment: Removal - Refitting
- Rear seat access mechanisms: Removal - Refitting
- Complete front seat: Removal - Refitting
- Front seat: Stripping - Rebuilding
READ NEXT:
Front seat base frame: Removal - Refitting
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
Front seatback frame: Removal - Refitting
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
Front seat runner: Removal - Refitting
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
SEE MORE:
Air conditioning: Precautions for the repair
AIR CONDITIONING or CLIMATE CONTROL
I - SAFETY
IMPORTANT
The following must be worn when handling refrigerant:
gloves,
protective goggles (with side shields if possible).
In the event of refrigerant fluid coming into contact
with the eyes, rinse well with clean water continuously
for 15 minutes.
D4F, and Left-hand Drive
REMOVAL
I - REMOVAL PREPARATION OPERATION
Put the vehicle on a two-post lift (see Vehicle: Towing and lifting).
Disconnect the battery (see Battery: Removal - Refitting).
Remove:
the non-return valve (1) from the servo,
the master cylinder (see 37A, Mechanical component
controls, Maste
© 2016-2025 Copyright Renault Clio Owners Club
