Renault Clio manuals

Renault Clio: General Information

Renault Clio III (2005-2013) Service Manual / Chassis / General Information

READ NEXT:

 Brake circuit: Operating diagram

" X " braking system with load-sensitive compensator IMPORTANT This is a diagram of the general principle, do not use it as a reference for take-off points or circuit allocation. When replacing compo

 Braking circuit: Bleed

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see 30A, General information, Brake c

 Underbody heights: Adjustment value

I - MEASURING POINTS Radius under load: (R1) : Distance between the ground and the front wheel shaft (R2) : Distance between the ground and the rear wheel shaft 1 - Front height (W1) (W1) : H

SEE MORE:

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (example B). If you have to place objects on the

 Engine cooling system: Operating diagram

D4F D4F, and 740 or 742 or 764 Engine Cooling radiator heater matrix Expansion bottle Water pump Thermostat Bleed screws 5 mm restriction 10 mm restriction Note: The rating of the expansion bottle degassing valve is 1.4 bar. D4F, and 784 Engine Cooling radiator Heater matrix Expans

© 2016-2025 Copyright Renault Clio Owners Club