Renault Clio: Starting, Stopping the engine

Renault Clio IV (2014-2019) Owners Manual / Driving / Starting, Stopping the engine

Remote control RENAULT card

Renault Clio. Remote control RENAULT card


When you get into the vehicle, insert the RENAULT card integrated key, pointing towards you, fully into the card reader 2.

To start, press button 1. If a gear is engaged, depress the clutch pedal to start the vehicle.

Hands-free RENAULT card

Renault Clio. Hands-free RENAULT card


The RENAULT card must be inserted in card reader 2 or in detection zone 3.

To start, depress the brake or clutch pedal and press button 1. If a gear is engaged, the vehicle may only be started by depressing the clutch pedal.

Starting with the boot open in hands-free mode

In this case, the RENAULT card must not be located in the luggage compartment.

Special features

vehicles with an automatic gearbox

The lever should be in position P.

All vehicles

Accessories function (switching on the ignition)

Renault Clio. Accessories function


Once you have gained access to your vehicle, you may use some of its functions (radio, navigation, wipers, etc.).

For other functions:

Note: depending on the vehicle, pressing button 1 starts the engine.

Never leave your vehicle with the RENAULT card in the reader or in the passenger compartment while there is a child (or an animal) in the vehicle, even for a short while.

They may pose a risk to themselves or to others by starting the engine.

Risk of serious injury.

Operating faults

In certain cases, the hands-free RENAULT card may not work:

The message “PLEASE INSERT KEYCARD” appears on the instrument panel.

Insert the RENAULT card fully into card reader 2.

Conditions for stopping the engine

Renault Clio. Conditions for stopping the engine


The vehicle must stationary, with the lever positioned in N or P for vehicles with an automatic transmission.

Special note

Depending on the vehicle, accessories (e.g. radio) stop working either when the engine is switched off or when the driver’s door is opened or when the doors are locked.

Remote control RENAULT card

With the card in reader 2, press button 1: the engine will stop. Removing the card from the reader locks the steering column.

Special note

If the card is no longer in the reader when you try to switch the engine off, the message “NO KEYCARD PRESS AND HOLD” will appear on the instrument panel: press the button 1 for longer than two seconds.

Hands-free RENAULT card

With the card in the vehicle, press button 1: the engine will stop. The steering column is locked when the driver’s door is opened or the vehicle is locked.

If the card is no longer in the passenger compartment when you try to switch the engine off, the message “NO KEYCARD PRESS AND HOLD” appears on the instrument panel: press the button 1 for longer than two seconds.

When you leave your vehicle, especially if you have your RENAULT card with you, check that the engine is completely switched off.

Never leave your vehicle with the RENAULT card inside and never leave a child (or a pet) unsupervised, even for a short while.

There is a risk that they could start the engine or operate electrical equipment (electric windows etc.) and trap part of their body (neck, arms, hands, etc.).

Risk of serious injury.

Never switch off the ignition before the vehicle has stopped completely.

Once the engine has stopped, the brake servo, power-assisted steering, etc. and the passive safety devices such as air bags and pretensioners will no longer operate.

READ NEXT:

 Stop and Start Function

This system enables a reduced fuel consumption and lower greenhouse gas emissions. The system is activated automatically when the vehicle is started. While driving, the system stops the engine (s

 Special features of petrol versions

The following operating conditions: driving for long periods when the low fuel level warning light is lit; using leaded petrol; using fuel or lubrication additives which are not approved.

 Special features of diesel versions

Diesel engine speed Diesel engines are fitted with injection equipment which prevents the engine speed being exceeded irrespective of the gear selected. If the message “CHECK ANTIPOLLUTION S

SEE MORE:

 D4F, and 784 or 786

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the engine undertray, the engine cover, the front bumper (see Front bumper:

 Flow actuator: Removal - Refitting

K9K, and 750 or 752 or 766 or 768 IMPORTANT Before carrying out any work on the injection system, check using the Diagnostic tool : that the injector rail is not under pressure, that the fuel temperature is not too high. It is essential to respect the safety and cleanliness advice whenever work

© 2016-2020 Copyright www.rclio.com