Renault Clio manuals

Renault Clio: Front Upper Structure

Renault Clio III (2005-2013) Service Manual / Panelwork / Front Upper Structure

READ NEXT:

 Front wing: General description

Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make s

 Front wing lower mounting support: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make

 Front end panel: General description

Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make s

SEE MORE:

 Brake servo non-return valve: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION K4J or K4M or K9K Remove the engine cover. II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the non-return valve (1) at the servo. Pull and turn the non-return valve to release it from the rubber sealing washer. K9K Disconn

 Display A

To access display 1 for setting the time, press button 2 or 3. Wait for a few seconds. The hours and minutes flash and you are now in setting mode; press and hold button 2 or 3 to set the hours. Once the minutes flash, repeatedly press or press and hold button 2 ou 3 to set the time.

© 2016-2025 Copyright Renault Clio Owners Club