{MAINCONT}

Renault Clio: Interior Equipment

READ NEXT:

 Dashboard: Removal - Refitting

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: (see Airbag and pretensioners: Prec

 Dashboard: Stripping - Rebuilding

IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: (see Airbag and pretensioners: Prec

 Centre console: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the trim (1). Unclip the gear lever trim. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (2). Push the seats forward as far

SEE MORE:

  Drive plate: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the gearbox (see Automatic gearbox: Removal - Refitting). II - OPERATION FOR REMOVAL OF PART CONCERNED Set up the (Mot. 582-01) (2). Remove: the bolts (2), the drive plate, tool (Mot. 582-01). REFITTING I - REFITTING PR

  Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid valve connector (2), Fit the hose end piece (Mot. 1592) in place of one of the removed plugs.

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0064