Renault Clio: Diesel injection: List and location of components
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection / Diesel injection: List and location of components
K9K, and 750 or 760 or 762 or 764 or 766 or 768
- High pressure pump
- Flow regulation solenoid valve
- Pressure regulation solenoid valve
- Diesel temperature sensor
- Spacer between the cylinder head and the injector clamp
- Injector clamp
- Diesel injector fuel return pipe
- Diesel injector
- High pressure pipe between the injector rail and the diesel injectors
- High pressure pipe between the high pressure pump and the rail
- Injector rail pressure sensor
- Injector rail
- Diesel filter (behind the front right-hand wheel arch liner)
- Turbocharger
- Exhaust gas recirculation solenoid valve
- Turbocharging air pressure sensor
- Air filter unit
- Injection computer
- Protection and switching unit
- Coolant temperature sensor
- Engine speed and position sensor
- Accelerometer
- Diesel fuel flow actuator
- Priming pump
K9K, and 764
(1) High pressure pump
(2) Flow regulation solenoid valve
(3) Pressure regulation solenoid
valve
(4) Diesel temperature sensor
(5) Spacer between the cylinder
head and the injector clamp
(6) Injector clamp
K9K, and 750 or 760 or 762 or 766 or 768
(1) High pressure pump
(4) Diesel temperature sensor
(8) Diesel injector
(9) High pressure pipe between the
injector rail and the diesel injectors
(10) High pressure pipe between the
high pressure pump and the rail
(11) Injector rail pressure sensor
(12) Injector rail
(30) Fuel flow actuator
(31) Venturi
K9K, and 764
(7) Diesel injector fuel return pipe
(8) Diesel injector
(9) High pressure pipe between the
injector rail and the diesel injectors
(10) High pressure pipe between the
high pressure pump and the rail
(11) Injector rail pressure sensor
(12) Injector rail
(13) Diesel filter (behind the front right-hand wheel arch liner)
K9K, and 760 or 762 or 764 or 766 or 768
(14) Turbocharger
(15) Exhaust gas recirculation solenoid
valve
(25) Turbocharger pressure regulation
valve
K9K, and 750
(14) Turbocharger
(15) Exhaust gas recirculation solenoid
valve
(25) Turbocharger pressure regulation
valve
(16) Turbocharging air pressure sensor
(17) Air filter unit
(18) Injection computer
(19) Protection and switching unit
(26) Accelerator pedal potentiometer
(27) Pre-postheating unit
(28) Refrigerant fluid sensor
K9K, and 760 or 762 or 764 or 766 or 768
(29) Catalytic converter
K9K, and 750
(29) Catalytic converter
K9K, and 752
- High pressure pump
- Diesel fuel temperature sensor
- Diesel injector fuel return pipe
- Injector rail pressure sensor
- Protection and Switching Unit
- Injection computer
- Air filter unit
- Turbocharger
- Exhaust gas recirculation solenoid valve
- High pressure pipe between the injector rail and the diesel injectors
- High pressure pipe between the pump and the injector rail
- Diesel injector
- Diesel filter
(1) High pressure pump
(4) Injector rail pressure sensor
(10) High pressure pipe between the
injector rail and the diesel injectors
(11) High pressure pipe between the
pump and the injector rail
(12) Diesel injector
(22) Spherical injector rail
(14) Venturi
(2) Diesel fuel temperature sensor
(15) Diesel flow actuator
(16) Accelerometer
(13) Diesel filter
(8) Turbocharger
(9) Exhaust gas recirculation solenoid
valve
(17) Turbocharging pressure regulation
valve
(7) Air filter unit
(18) Turbocharging air pressure sensor
(19) Injection computer
(20) Protection and Switching Unit
(21) Pre-postheating unit
READ NEXT:
Diesel injection computer: Configuration
K9K, and 750 or 752 or 764 or 766 or 768
To configure the computer, (see MR 394 Fault finding,
Diesel Injection, Configuration and programming).
Diesel injection computer: Removal - Refitting
K9K
High pressure pump leak flow: Check
K9K, and 764 or 772
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Disconnect the inlet pressure sensor (1).
Remove:
the air duct (2) between the air fil
High pressure pump: Removal - Refitting
K9K, and 764 or 772
WARNING
Before starting work on the vehicle, obtain:
a new plug kit (PART NO. 77 01 476 857),
cleaning cloths (PART NO. 77 11 211 707),
cleaning product (PART NO. 77 11 224 18
SEE MORE:
Catalytic pre-converter: Removal - Refitting
K9K, and 772
PARTS AND CONSUMABLES FOR THE
REPAIR WORK
Parts always to be replaced:
the seal between the catalytic pre-converter and
the turbocharger,
the seal between the catalytic pre-converter and
the flexible pipe.
Consumables:
abrasive pads,
surface cleaner 77 01 404 178,
Front footwell air distribution duct: Removal -
Refitting
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
1 - Driver's side
Remove the centre console (see Centre console:
Removal - Refitting) (MR 393, 57A, Interior equipment).
Unclip the dashboard lower trim at (1) and (2).
Partially remove the door seal. (3)
Remove the side panel
