Renault Clio: K4M, and JH3 - K4J, and JH3 - K4M, and TL4

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

AIR CONDITIONING

 

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL

Renault Clio. Engine - gearbox assembly: Removal - Refitting

WARNING

To prevent moisture from entering the system, place plugs on the cold loop components which are open to the air.

 

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

K4J - K4M, and JH3

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

IMPORTANT

During this operation, be sure to:

WARNING

To avoid any corrosion or damage, protect the areas on which fuel is likely to run.

WARNING

To prevent impurities from entering the circuit, place protective plugs on all fuel circuit components exposed to the open air.

JH3

Renault Clio. Engine - gearbox assembly: Removal - Refitting

TL4

Renault Clio. Engine - gearbox assembly: Removal - Refitting

 

JH3

Renault Clio. Engine - gearbox assembly: Removal - Refitting

TL4

Renault Clio. Engine - gearbox assembly: Removal - Refitting

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Engine - gearbox assembly: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

K4M, and JH3 - K4J, and JH3

 

AIR CONDITIONING or CLIMATE CONTROL

 

AIR CONDITIONING

READ NEXT:

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the

 K9K, and JH3 or JR5 - K9K, and 772, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING During this operation, secure the ve

 D4F, and 740 or 742 or 764

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). IMPORTANT During this operation, secure the vehicle to the lift with a strap

SEE MORE:

 Passenger compartment temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the upper casing. Unclip the lower casing (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the passenger compartment temperature sensor connector (2). Remove: the passenger compartment temperature sensor bolts located insid

 Electronic stability program (ESC) with understeer control and traction control

Electronic stability control ESC This system helps you to keep control of the vehicle in critical driving conditions (avoiding an obstacle, loss of grip on a bend, etc.). Operating principle A sensor in the steering wheel detects the direction selected by the driver. Other sensors througho

© 2016-2021 Copyright www.rclio.com