Renault Clio manuals

Renault Clio: Engine Immobiliser

Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Engine Immobiliser

READ NEXT:

 Immobiliser system: List and location of components

I - LIST OF COMPONENTS II - LOCATION OF COMPONENTS VEHICLE WITH KEY 1 - Antenna/Transponder ring 2 - Ignition switch 3 - UCH 4 - Key VEHICLE WITH CARD 5 - Front starting aerial 6 - Central start

 Ignition switch: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see 80A, Battery, Battery: Removal - Refitting, 80A-1). Unclip trim (1). Remove: the plastic rivet (2), bolt (3).

 Transponder ring: Removal - Refitting

VEHICLE WITH KEY REMOVAL I - REMOVAL PREPARATION OPERATION Unclip trim (1). Remove: the plasti-rivet (2), the bolt (3). Remove the door seal. Unclip the dashboard side face (4).

SEE MORE:

 Rear inner sill upper trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the complete rear bench seat. Partially remove seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the trim at (2) and at (3). REFITTING I - REFITTING OPERATION FOR PART CONCERNED Refit the rear door sill upper trim. II - F

 Exhaust gas recirculation rigid pipe: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove the engine style cover. Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Batter

© 2016-2025 Copyright Renault Clio Owners Club