Renault Clio: Passenger's front side door wiring: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Wiring Harness / Passenger's front side door wiring: Removal - Refitting

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

REMOVAL

I - REMOVAL PREPARATION OPERATION

WARNING

To avoid damaging the connectors, consult the disconnection procedures (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

LEFT-HAND DRIVE

RIGHT-HAND DRIVE, and DOOR MIRRORS 02 or DOOR MIRRORS 03

 

Renault Clio. Passenger's front side door wiring: Removal - Refitting

II - REMOVAL OF PART CONCERNED

Renault Clio. Passenger's front side door wiring: Removal - Refitting

WARNING

To prevent any risk of noise, premature wear, short circuits, etc. after the refitting operation, mark the wiring routing and how to connect the connectors.

VEHICLE WITH CARD

ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER ELECTRIC ONE-TOUCH WINDOW CONTROL

Renault Clio. Passenger's front side door wiring: Removal - Refitting

Renault Clio. Passenger's front side door wiring: Removal - Refitting

Renault Clio. Passenger's front side door wiring: Removal - Refitting

WARNING

To prevent any damage during the removal operation, check that the wiring is free from its mountings (retaining clip, plastic clip, adhesive tape, connector, etc.).

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING PART CONCERNED

ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC FRONT WINDOW or PASSENGER ELECTRIC ONE-TOUCH WINDOW CONTROL

VEHICLE WITH CARD

 

RIGHT-HAND DRIVE, and DOOR MIRRORS 02 or DOOR MIRRORS 03

LEFT-HAND DRIVE

 

READ NEXT:

 Rear right-hand side door wiring: Removal - Refitting

B85 or K85 IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). REMOVA

 Rear left-hand side door wiring: Removal - Refitting

B85 or K85 IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). REMOVA

 Rear wiring: Connector access

I - LOCATION OF CONNECTORS R 374 connectors (left-hand rear wiring/front wiring connection). B85 or K85 R 2 connector (left-hand rear wiring/dashboard wiring connection). R 13 connector (lef

SEE MORE:

 ECO mode

ECO mode is a function which optimises fuel consumption. It acts on all elements which consume fuel (engine power, heating and/or air conditioning, etc). Activating the function Press switch 4. The 5 warning light comes on on the instrument panel to confirm activation. While driving

 Seat Accessories

Heated seat pad: Removal - Refitting WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the front seat (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33), the seat base trim (see 77A, Front seat trim,

© 2016-2022 Copyright www.rclio.com