Renault Clio: Rear lighting: List and location of components
Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Rear Lighting / Rear lighting: List and location of components
I - LIST OF COMPONENTS
The rear lighting is composed of:
- the rear lights on the wing (see 81A, Rear lighting, Rear wing light: Removal - Refitting, 81A-5)
- rear light bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7)
- a high-level brake light (see 81A, Rear lighting, 3rd brake light: Removal - Refitting, 81A-10)
- the rear fog lights (see 81A, Rear lighting, Rear fog lights: Removal - Refitting, 81A-14)
- the number plate lights (see 81A, Rear lighting, Number plate light: Removal - Refitting, 81A- 16)
II - LOCATION OF COMPONENTS
B85 or C85 or S85, and DOCUMENTATION PHASE 1
Rear light on wing
Rear light bulbs
- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
- Rear fog light bulb
High level brake light
Rear fog light
Number plate lights
K85, and DOCUMENTATION PHASE 1
Rear lights on the wing
Rear light bulbs
- Brake light and side light bulb
- Direction indicator bulb
- Reversing light bulb
High level brake light
Rear fog lights
Number plate lights
B85 or C85 or S85, and DOCUMENTATION PHASE 2
Rear lights on the wing
Rear light bulbs
- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
High level brake light
Rear fog lights
Number plate lights
READ NEXT:
Rear wing light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Open the luggage compartment.
Remove the bolts from the rear wing light (1).
Remove the rear wing light.
Disconnect the connec
Rear light bulb: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
SEE MORE:
Remote headlight beam adjustment actuator: Removal - Refitting
DOCUMENTATION PHASE 1
DISCHARGE LAMPS
IMPORTANT
To prevent burns, wait until the " computers -
power unit " assemblies are cold before removal.
IMPORTANT
To prevent eye injuries:
do not look at a xenon bulb when lit (voltage
when lit 20000 V),
do not light a bulb which has not been fitted into
Hill start assistance
This function assists the driver when
starting on hills. It prevents the vehicle
from rolling backwards, depending on
the slope, by automatically applying the
brakes when the driver lifts his/her foot
off the brake pedal to depress the accelerator
pedal.
System operation
It only operates whe
© 2016-2024 Copyright Renault Clio Owners Club
