Renault Clio: Antipollution

READ NEXT:

 Exhaust gas recirculation: List and location of components

K9K K9K, and 764 or 766 or 768 or 772 First fitting of the exhaust gas cooler recirculation assembly (1) Exhaust gas recirculation solenoid valve (2) Exhaust gas cooler (3) Exhaust gas inlet pipe (4)

 Exhaust gas recirculation solenoid valve: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

 Exhaust gas cooler: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect

SEE MORE:

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid valve connector (2), Fit the hose end piece (Mot. 1592) in place of one of the removed plugs.

 Sunroof mobile panel: Removal - Refitting

PANORAMIC SUNROOF REMOVAL I - REMOVAL PREPARATION OPERATION Open the moving panel. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the rear bolts (1) from the mobile panel. Remove: the mobile panel front bolts (2), the mobile panel (this operation requires two people). REFITT

© 2016-2025 Copyright Renault Clio Owners Club