Renault Clio: Manual Gearbox

READ NEXT:

 Manual gearbox: Identification

JA3 or JA5 or JH3 or JR5 K4J / K4M / K9K / D4F engines are fitted with type JH and JR manual gearboxes. A marking (1) on the gearbox casing indicates: Gearbox type Gearbox suffix Production plan

 Manual gearbox: Removal - Refitting

JH3 or JR5 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). IMPORTANT During this operation, secure the vehicle to the lift wi

 Input shaft lip seal: Removal - Refitting

JH3 or JR5 Replace the lip seal after opening the gearbox (see Technical Note 3661A, gearbox JH - JR). TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the gearbox (see 21A, Manual gearb

SEE MORE:

 M4R, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the vehicle to the lift with a strap to prevent it from becoming unbalanced. Remove the engine cover.

 Flow control solenoid valve: Removal - Refitting

DP0 Do not drain or remove the automatic gearbox in order to remove the flow control solenoid valve REMOVAL I - REMOVAL PREPARATION OPERATION Place the vehicle on a two-post lift (see 02A, Lifting equipment, Vehicle: Towing and lifting). Disconnect the battery (see 80A, Battery, Battery: Remov

© 2016-2025 Copyright Renault Clio Owners Club