Renault Clio manuals

Renault Clio: Antipollution

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Antipollution

READ NEXT:

 Exhaust gas recirculation: List and location of components

K9K K9K, and 764 or 766 or 768 or 772 First fitting of the exhaust gas cooler recirculation assembly (1) Exhaust gas recirculation solenoid valve (2) Exhaust gas cooler (3) Exhaust gas inlet pipe (4)

 Exhaust gas recirculation solenoid valve: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

 Exhaust gas cooler: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect

SEE MORE:

 Automatic gearbox converter: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front left-hand wheel arch liner (see Front wheel arch liner: Removal - Refitting) (MR 393, 55A, Exterior protection). Remove the resonator on the battery. Disconnect the battery (see ) (MR 392, 80A, Battery). II - OPERATION FOR REMOVAL

 Towing

Before towing, unlock the steering column: with the clutch depressed, engage first gear (lever in position N or R for vehicles with automatic gearboxes), insert the RENAULT card in the card reader, then press the engine start button for two seconds. Reposition the lever to neutral (position

© 2016-2025 Copyright Renault Clio Owners Club