Renault Clio: Engine - gearbox assembly: Removal - Refitting

READ NEXT:

 K4M, and JH3 - K4J, and JH3 - K4M, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitt

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the

 K9K, and JH3 or JR5 - K9K, and 772, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING During this operation, secure the ve

SEE MORE:

 Inlet distributor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17). Remove: the oil filler neck mounting bolt (1), the oil filler

 Automatic gearbox

Selector lever 1 P: park R: reverse N: Neutral D: automatic mode M: manual mode +: upper gear –: lower gear 4: displays the gear engaged in manual mode. Note: Press the button 2 to go from position D or N to R or P. Operation With the selection lever 1 in position P, switch o

© 2016-2025 Copyright Renault Clio Owners Club