Renault Clio: Engine - gearbox assembly: Removal - Refitting

READ NEXT:

 K4M, and JH3 - K4J, and JH3 - K4M, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitt

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the

 K9K, and JH3 or JR5 - K9K, and 772, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING During this operation, secure the ve

SEE MORE:

 Rear parcel shelf side trim: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION C85 Remove the rear wing panel trim (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32). B85 Unclip the rear inner sill upper trim (see 71A, Body internal trim, Rear inner sill upper trim: Removal - Refitting, 71A-24). B85

 Engagement sensor: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the front left-hand wheel (see Wheel: Rem

© 2016-2025 Copyright Renault Clio Owners Club