Renault Clio manuals

Renault Clio: Brake servo: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Chassis / Mechanical Component Controls / Brake servo: Removal - Refitting

READ NEXT:

 K4J or K4M or K9K or M4R, and Left-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the battery (see Battery: Remova

 K9K, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal

 D4F, and Left-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Remove: the non-ret

SEE MORE:

 Oil filter: Removal - Refitting

K9K WARNING Always check the oil level using the dipstick. Do not exceed the maximum level on the dipstick (could destroy the engine). Correct the engine oil level if necessary before delivering the vehicle to the customer. Note: When topping up the engine oil, always leave at least 10 minutes be

 Hydraulic unit - master cylinder brake pipe: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Fit a pedal press on the brake pedal. K4J or K4M or K9K Remove the battery (see Battery: Removal - Refit

© 2016-2025 Copyright Renault Clio Owners Club