Renault Clio: Indicator lights (changing bulbs)
Renault Clio IV (2014-2019) Owners Manual / Practical advice / Indicator lights (changing bulbs)
Courtesy light
Unclip the lens 1 (using a flat-bladed screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W.
Luggage compartment light
Unclip the light 2 by pressing the tab on its left side (using a flat-bladed screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W.
| The bulbs are under pressure
and can break when
replaced. Risk of injury. |
Glovebox light
Unclip the light 3 by pressing the tab on its left side (using a flat-bladed screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W.
Ambient lighting
Please consult an authorised dealer.
Courtesy mirrors
Unclip the light 4 by pressing the tab on its left side (using a flat-bladed screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W
READ NEXT:
RENAULT card: battery
Replacing the battery
When the message “KEYCARD
BATTERY LOW” appears on the instrument
panel, replace the RENAULT card
battery, press button 1 pulling on emergency
key 2, then unclip the
Fuses
Fuses in passenger compartment A
If any electrical component does not
work, check the condition of the fuses.
Unclip the access flap A.
To comply with current legislation, or
as a
Battery
To avoid all risk of sparks:
Ensure that any electrical consumers
(courtesy lights, etc.) are switched
off before disconnecting or reconnecting
the battery.
When charging, stop the charger
SEE MORE:
Rear brake calliper: Repair
WARNING
Prepare for the flow of fluid, and protect the surrounding
components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Release the parking brake.
Remove the rear wheels (see 35A, Wheel
Front brake hose: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any repair (see Front axle components:
Precautions for the repair).
WARNING
Prepare for the flow of fluid, and protect the surrounding
components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Posi
© 2016-2021 Copyright www.rclio.com