Renault Clio: Oil level sensor: Removal - Refitting

D4F, and 740 or 742 or 764

Renault Clio. Oil level sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Oil level sensor: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

K9K

Renault Clio. Oil level sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Oil level sensor: Removal - Refitting

REFITTING

I - REFITTING PART CONCERNED

II - FINAL OPERATION

K4J or K4M

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Oil level sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION

M4R

Renault Clio. Oil level sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Oil level sensor: Removal - Refitting

II - REMOVAL OF PART CONCERNED

REFITTING

I - REFITTING PART CONCERNED

II - FINAL OPERATION.

F4R

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Oil level sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

D4F, and 784 or 786

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Oil level sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

READ NEXT:

 Lower cover: Removal - Refitting

K9K REMOVAL Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the resonator on the battery, the battery covers. Disconnect the b

 Conrod bearing shell: Removal - Refitting

K9K IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair (see Vehicle: Precautions for th

 Oil pump: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the bat

SEE MORE:

 Passenger Compartment Connection Unit

UCH: Removal - Refitting RIGHT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION If replacing the UCH, carry out the necessary programming using the Diagnostic tool. (see Fault finding - Replacement of components) (MR 394, 87B, Passenger compartment connection unit). Disconnect the battery

 D4F, and Left-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Remove: the non-return valve (1) from the servo, the master cylinder (see 37A, Mechanical component controls, Maste

© 2016-2021 Copyright www.rclio.com