Renault Clio: Engine - gearbox assembly: Removal - Refitting

READ NEXT:

 K4M, and JH3 - K4J, and JH3 - K4M, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the battery (see Battery: Removal - Refitt

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the

 K9K, and JH3 or JR5 - K9K, and 772, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING During this operation, secure the ve

SEE MORE:

 Front seatback trim: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 IMPORTANT Before carrying out any work on a safety or proximity system component, lock the airbag computer using the Diagnostic tool. When this function is activated, all the trigger lines are disabled and the airbag instrument panel warning light is c

 Five-door version

Side lights/brake and direction indicator lights Open the boot lid and remove screws 1. The bulbs are under pressure and can break when replaced. Risk of injury. To release the light unit, start by moving the exterior edge away to a sufficient extent (movement A) t

© 2016-2025 Copyright Renault Clio Owners Club