Renault Clio: Water chamber: Removal - Refitting

D4F, and 740 or 742 or 784

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

D4F, and 740 or 742

D4F, and 784

Renault Clio. Water chamber: Removal - Refitting

D4F, and 784

Renault Clio. Water chamber: Removal - Refitting

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

Note: Protect the TDC sensor with a cloth to prevent coolant entering the gearbox aperture.

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

WARNING

Do not scrape the joint faces of the aluminium, any damage caused to the joint face will result in a risk of leaks.

IMPORTANT

Wear protective gloves during the operation.

IMPORTANT

Wear goggles with side protectors for this operation.

WARNING

The joint faces must be clean, dry and free from grease (avoid finger marks).

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

D4F, and 784

D4F, and 740 or 742

 

K9K

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Water chamber: Removal - Refitting

Renault Clio. Water chamber: Removal - Refitting

II - REMOVAL OF THE PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

Renault Clio. Water chamber: Removal - Refitting

WARNING

The joint faces must be clean, dry and free from grease (avoid finger marks).

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

K4J or K4M

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Water chamber: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

II - FINAL OPERATION

M4R

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Water chamber: Removal - Refitting

II - REMOVAL OF PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING PART CONCERNED

III - FINAL OPERATION

F4R

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Water chamber: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

Renault Clio. Water chamber: Removal - Refitting

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

D4F, and 764

Renault Clio. Water chamber: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Water chamber: Removal - Refitting

Note: Protect the TDC sensor with a cloth to prevent coolant entering the gearbox aperture.

Renault Clio. Water chamber: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

WARNING

Do not scrape the joint faces of the aluminium, any damage caused to the joint face will result in a risk of leaks.

IMPORTANT

Wear protective gloves during the operation.

IMPORTANT

Wear goggles with side protectors for this operation.

WARNING

The joint faces must be clean, dry and free from grease (avoid finger marks).

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION

READ NEXT:

 Coolant temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). Remove: the engine cover, the air intake sleeve. II - OPERATION FOR REM

 Engine cooling fan assembly: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the engine cover, the battery

 Coolant pump inlet pipe: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Disconnect the battery (se

SEE MORE:

 Passenger's frontal airbag: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88C, Air bag and Pretensioners, Airbag and pretensioners: Precautions for the repair, 88C-6). REMOVAL I - REMOVAL PREPARATION OPERATION The passenger airbag is mounted beneath the

 Battery for remote door locking control: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED VEHICLE WITH KEY Remove the bolt (1). Open the key with a coin (2). VEHICLE WITH CARD Remove the mechanical insert (3). REFITTING I - REFITTING PREPARATION OPERATION WARNING To ensure that the remote control operates correctly, take care no

© 2016-2021 Copyright www.rclio.com