Renault Clio: Front Lower Structure

READ NEXT:

 Front end lower cross member: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading this general information, check that th

 Radiator mounting cross member: General description

Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading this general information, check that ther

 Front side member: General description

IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure fo

SEE MORE:

 M4R, and TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove the front engine cover. Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). Remove: the nut (1) from the protective

 M4R, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the engine cover, the engine undertray, the scu

© 2016-2025 Copyright Renault Clio Owners Club