{MAINCONT}

Renault Clio: Top And Front Of Engine

READ NEXT:

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid val

 Accessories belt: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).

 Crankshaft accessories pulley: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the fron

SEE MORE:

  Sunroof opening control: Removal - Refitting

PANORAMIC SUNROOF REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Unclip the roof opening control using a flat-blade screwdriver (1). Disconnect the connectors. REFITTING REFITTING OPERATION FOR PART CONCERNED Connect the connectors. Clip the sunroof opening control. Sunroof operating mecha

  Sunroof mobile panel: Removal - Refitting

PANORAMIC SUNROOF REMOVAL I - REMOVAL PREPARATION OPERATION Open the moving panel. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the rear bolts (1) from the mobile panel. Remove: the mobile panel front bolts (2), the mobile panel (this operation requires two people). REFITT

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.005