{MAINCONT}

Renault Clio: Top And Front Of Engine

READ NEXT:

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid val

 Accessories belt: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).

 Crankshaft accessories pulley: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the fron

SEE MORE:

  Front seat lower casing: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before doing any work on a safety system component, be sure to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair). When this function is activated, all the trigger lines are inhibited

  Rear Seat Trim

1/3 and 2/3 rear bench seat base trim: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Lift up the rear bench seat base. Remove the rear bench seat base at (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unclip the retaining strips (2). Remove the seat trim and foam.

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0036