Renault Clio: Engine - gearbox assembly: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Engine And Cylinder Block Assembly / Engine - gearbox assembly:
Removal - Refitting
- K4M, and JH3 - K4J, and JH3 - K4M, and TL4
- K4M, and DP0
- K9K, and JH3 or JR5 - K9K, and 772, and TL4
- D4F, and 740 or 742 or 764
- M4R, and DP0
- F4R
- M4R, and TL4
- K9K, and JA5
- D4F, and JA3
- D4F, and 784 or 786
- K9K, and JH3 or JR5 or TL4
READ NEXT:
K4M, and JH3 - K4J, and JH3 - K4M, and TL4
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
Remove:
the battery (see Battery: Removal - Refitt
K4M, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
IMPORTANT
During this operation, secure the
K9K, and JH3 or JR5 - K9K, and 772, and TL4
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
WARNING
During this operation, secure the ve
SEE MORE:
Rear wheel arch trim: Removal - Refitting
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensioners).
IMPORTANT
To avoid any risk of triggering when working on
or near a pyrotechnic co
Crankshaft position sensor: Removal - Refitting
K9K, and 764 or 766 or 768
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Disconnect the battery (see Battery: Removal - Refitting).
Remove the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Disconnect th
© 2016-2025 Copyright Renault Clio Owners Club
