Renault Clio: Exhaust

READ NEXT:

 Exhaust: List and location of components

PIPE ASSEMBLY D4F, and 740 or 742 or 764 (ZC1) cutting area between the catalytic converter and the expansion chamber (ZC2) cutting area between the expansion chamber and the silencer D4F, and 784 or

 Exhaust: Precautions for the repair

I - PARTS AND CONSUMABLES FOR THE REPAIR 1 - Parts always to be replaced: the exhaust trunking (if fitted) the seal or sealing ring on the connection between the catalytic converter or catalytic

 Catalytic pre-converter: Removal - Refitting

K9K, and 772 PARTS AND CONSUMABLES FOR THE REPAIR WORK Parts always to be replaced: the seal between the catalytic pre-converter and the turbocharger, the seal between the catalytic pre-conve

SEE MORE:

 Engine oil level: topping up, filling

Topping up/filling The vehicle must be parked on level ground and the engine should be cold (for instance, before the engine is started up for the first time in the day). Before performing any action in the engine compartment, the ignition must be switched off by pressing

 Front side door trim: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front speaker (see Front speakers: Removal - Refitting) (MR 392, 86A, Radio). Unclip the door mirror trim piece (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Use a flat-blade screwdriver to undo the trim piece (2). Remove the bo

© 2016-2025 Copyright Renault Clio Owners Club