Renault Clio: Exhaust

READ NEXT:

 Exhaust: List and location of components

PIPE ASSEMBLY D4F, and 740 or 742 or 764 (ZC1) cutting area between the catalytic converter and the expansion chamber (ZC2) cutting area between the expansion chamber and the silencer D4F, and 784 or

 Exhaust: Precautions for the repair

I - PARTS AND CONSUMABLES FOR THE REPAIR 1 - Parts always to be replaced: the exhaust trunking (if fitted) the seal or sealing ring on the connection between the catalytic converter or catalytic

 Catalytic pre-converter: Removal - Refitting

K9K, and 772 PARTS AND CONSUMABLES FOR THE REPAIR WORK Parts always to be replaced: the seal between the catalytic pre-converter and the turbocharger, the seal between the catalytic pre-conve

SEE MORE:

 Air filter unit: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Apply pressure to (1). Pull at (2). Remove the air breather sleeve (3) from the front end panel. Undo the clip (4) mounting the air filter unit to the motorised throttle valve. Disconnect the oil vapour rebreathing hose

 Battery: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 80A, Battery, Battery: Precautions for the repair, 80A-4). REMOVAL I - REMOVAL PREPARATION OPERATION WARNING Before disconnecting the battery: wait for the motor-driven fan assemb

© 2016-2025 Copyright Renault Clio Owners Club