Renault Clio: Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

 Clutch pedal switch: Removal - Refitting

JH3 or JR5 or TL4, and CRUISE CONTROL - JH3 or JR5 or TL4, and VEHICLE WITH CARD REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the driver side dashboard lower trim clips (1), the driver side dashboard lower trim (2). II - OPERATION FOR REMOVAL OF PART CONCERNED CRUISE CONTROL Dis

 Pump - sender - filter: Removal - Refitting

D4F or F4R or K4J or K4M or M4R IMPORTANT During this operation, be sure to: be careful of fuel splashes when disconnecting the union. IMPORTANT Wear goggles with side protectors for this operation. IMPORTANT Wear latex gloves during the operation. WARNING To prevent impurities from entering th

© 2016-2025 Copyright Renault Clio Owners Club