Renault Clio manuals
{MAINCONT}

Renault Clio: Diesel Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

  Driveshaft: Precautions for the repair

DP0 or JH3 or JR5 or TL4 WARNING A gearbox oil leak at the driveshaft may destroy it. WARNING Always replace seals whenever the driveshaft is removed. WARNING Grease the base of the bearing using BR 2 + grease to prevent the bearing from sticking. Make sure that the O-ring is correctly positioned i

  Relay shaft bearing: Removal - Refitting

M4R, and TL4 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the front right-hand driveshaft (see 29A,

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.004