Renault Clio manuals
{MAINCONT}

Renault Clio: Diesel Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

  Rear inner sill upper trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the complete rear bench seat. Partially remove seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the trim at (2) and at (3). REFITTING I - REFITTING OPERATION FOR PART CONCERNED Refit the rear door sill upper trim. II - F

  C-pillar upper trim: Removal - Refitting

C85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32), the rear roof drip moulding lining (see 71A, Body internal trim, Side roof rail rear trim: Removal - Refitting, 71A-17), the r

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0036