Renault Clio: Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

 M4R, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the engine cover, the engine undertray, the scu

 Scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the wiper arms (see Windscreen wiper arm: Removal - Refitting) (MR 392, Mechanical systems, 85A, Washing - Wiping). Remove the seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove clips (2). Remove the scuttle panel grille (3)

© 2016-2025 Copyright Renault Clio Owners Club