Renault Clio manuals
{MAINCONT}

Renault Clio: Diesel Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

  Front wheel arch liner: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove the front wheel (see Wheel: Removal - Refitting) (MR 392, 35A, Wheels and tyres). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove

  Rear bumper: Stripping - Rebuilding

B85 or C85 or S85, and EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5, and DOCUMENTATION PHASE 1 STRIPPING I - STRIPPING PREPARATION OPERATION Remove the rear bumper (see 55A, Exterior protection, Rear bumper: Removal - Refitting,

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0044