Renault Clio: Body Internal Trim
- Centre floor front carpet: Removal - Refitting
- Headlining: Removal - Refitting
- Front door sill lining: Removal - Refitting
- Rear wheel arch trim: Removal - Refitting
- Windscreen pillar trim: Removal - Refitting
- B-pillar upper trim: Removal - Refitting
- B-pillar trim: Removal - Refitting
- Rear inner sill upper trim: Removal - Refitting
- C-pillar upper trim: Removal - Refitting
- Quarter panel trim: Removal - Refitting
- Rear panel lining: Removal - Refitting
- Rear parcel shelf side trim: Removal - Refitting
- Rear end panel lining: Removal - Refitting
- Rear loading trim: Removal - Refitting
READ NEXT:
Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the complete rear bench seat,
the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33),
Headlining: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
SEE MORE:
Multimedia equipment
The presence and location of this equipment
depends on the vehicle version.
Multimedia touchscreen;
Multimedia sockets;
Steering column control;
Voice commands;
Microphone.
Refer to the equipment instructions
for information on how to operate
this equipment.
Brake servo non-return valve: Removal - Refitting
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
K4J or K4M or K9K
Remove the engine cover.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Disconnect the non-return valve (1) at the servo.
Pull and turn the non-return valve to release it from
the rubber sealing washer.
K9K
Disconn
© 2016-2025 Copyright Renault Clio Owners Club
