{MAINCONT}

Renault Clio: Body Internal Trim

READ NEXT:

 Centre floor front carpet: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the complete rear bench seat, the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),

 Headlining: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Airbag and pretensioners: Precautions for the repair) (88C, Airbags and pretensio

 Front door sill lining: Removal - Refitting

B85 or C85 REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove the seal (1). Using a pair of unclipping pliers, unclip the bonnet release catch (2). II - OPERATION FOR REMOVAL OF PART C

SEE MORE:

  Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid valve connector (2), Fit the hose end piece (Mot. 1592) in place of one of the removed plugs.

  Accessories belt: Removal - Refitting

K4J, and STANDARD HEATING - K4M, and STANDARD HEATING REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery). Remove: the front rig

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0069