Renault Clio: Body Internal Trim

READ NEXT:

 Centre floor front carpet: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the complete rear bench seat, the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33),

 Headlining: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Airbag and pretensioners: Precautions for the repair) (88C, Airbags and pretensio

 Front door sill lining: Removal - Refitting

B85 or C85 REMOVAL I - REMOVAL PREPARATION OPERATION Partially remove the seal (1). Using a pair of unclipping pliers, unclip the bonnet release catch (2). II - OPERATION FOR REMOVAL OF PART C

SEE MORE:

 Particle filter temperature sensors: Removal - Refitting

K9K, and 772 The particle filter must be removed in order to remove the catalytic converter upstream temperature sensor. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Disconnect the battery (s

 Sequential gearbox gear lever: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the gear lever cover (1) using a screwdriver. Disconnect the gear lever lighting connector (2).

© 2016-2025 Copyright Renault Clio Owners Club