Renault Clio: Body Internal Trim
- Centre floor front carpet: Removal - Refitting
- Headlining: Removal - Refitting
- Front door sill lining: Removal - Refitting
- Rear wheel arch trim: Removal - Refitting
- Windscreen pillar trim: Removal - Refitting
- B-pillar upper trim: Removal - Refitting
- B-pillar trim: Removal - Refitting
- Rear inner sill upper trim: Removal - Refitting
- C-pillar upper trim: Removal - Refitting
- Quarter panel trim: Removal - Refitting
- Rear panel lining: Removal - Refitting
- Rear parcel shelf side trim: Removal - Refitting
- Rear end panel lining: Removal - Refitting
- Rear loading trim: Removal - Refitting
READ NEXT:
Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the complete rear bench seat,
the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33),
Headlining: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
SEE MORE:
Brake servo: Check
RIGHT-HAND DRIVE
There is no "RENAULT" tool to check the braking assistance
circuit.
Use a vacuum pump fitted with couplings, part numbers
7701349942 and 7700105874 with hose part
number 8200027352 or 8200376245.
CHECK
I - CHECKING THE SEALS
When checking the brake servo seal, ensure that there
Towing, attachments
Permissible nose weight, maximum
permissible towing weight,
braked and unbraked: refer to
the information on “Weights” in
Section 6.
For fitting and conditions of use,
refer to the equipment’s fitting instructions.
Please keep these instructions with
the rest
© 2016-2025 Copyright Renault Clio Owners Club
