Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Petrol injection: List and location of components

D4F, and 740 or 742 or 764 Petrol vapour rebreathing solenoid valve Air inlet pressure sensor Motorised throttle valve Injection computer (5) Fuel injection computer (6) Motorised throttle valve (7) Fuel vapour recirculation solenoid valve (8) Ignition coil (9) Upstream oxygen sensor (1

 Rear bench seat: functions

Position for use Raise the headrest as far as possible to use it in the high position. Check that it is correctly locked. Storage position Press button A and lower the headrest completely. When the headrest is set at the lowest position, this is for storage only. It should not be in t

© 2016-2025 Copyright Renault Clio Owners Club