Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Door mirror: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the trim (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the sealing foam (2), the bolts (3) the door mirror. Disconnect the supply connectors (depending on equipment level). SCHOOL VEHICLE Unclip the casing (4). R

 Evaporator: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL Note: The evaporator is supplied already assembled in the distribution unit. (1) REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the distribution unit (see 61A, Heating, Distribution unit: Removal - Refitting, 61A- 50). REFITTING REFITTING OPERATION FO

© 2016-2025 Copyright Renault Clio Owners Club