Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Rear wing light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Open the luggage compartment. Remove the bolts from the rear wing light (1). Remove the rear wing light. Disconnect the connector from the rear light on the wing. Remove the rear light. If replacing the rear light, remove t

 Exhaust: List and location of components

PIPE ASSEMBLY D4F, and 740 or 742 or 764 (ZC1) cutting area between the catalytic converter and the expansion chamber (ZC2) cutting area between the expansion chamber and the silencer D4F, and 784 or 786 (ZC1) cutting area between the expansion chamber and the silencer K4J (ZC1) cutting area betw

© 2016-2025 Copyright Renault Clio Owners Club