Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Centre floor front carpet: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the complete rear bench seat, the front seats (see 75A, Front seat frames and mechanisms, Complete front seat: Removal - Refitting, 75A-33), the centre console (see Centre console: Removal - Refitting), the front door sill trims (see 71

 3rd brake light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the blanking covers (1). Insert a screwdriver in the openings to move the clips (2). Apply pressure to the clips (2) to unclip the high level brake light. Partially remove the raised brake light using a flat-blade

© 2016-2025 Copyright Renault Clio Owners Club