Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Exhaust: Precautions for the repair

I - PARTS AND CONSUMABLES FOR THE REPAIR 1 - Parts always to be replaced: the exhaust trunking (if fitted) the seal or sealing ring on the connection between the catalytic converter or catalytic pre-converter and the rest of the exhaust system the exhaust clip(s) (if fitted) 2 - Consumables

 Heater matrix: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Place hose clamps (Ms. 583) on the heater matrix hoses at (1). Remove: the heater matrix hose clips, the heater matrix hoses, the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment).

© 2016-2025 Copyright Renault Clio Owners Club