Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Rear parcel shelf side trim: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION C85 Remove the rear wing panel trim (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32). B85 Unclip the rear inner sill upper trim (see 71A, Body internal trim, Rear inner sill upper trim: Removal - Refitting, 71A-24). B85

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head and the injector clamp Injector clamp Diesel injector fuel return pipe Diesel injector High pre

© 2016-2025 Copyright Renault Clio Owners Club