Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Diesel injector: Configurations

K9K, and 750 or 752 or 766 or 768 To configure the injectors, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injector: Removal - Refitting K9K, and 764 or 772 IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions

 Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL Equipment required Dual-sensor temperature measuring device Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold. I - PREPARATION OPERATION FOR THE MEASUREMENT

© 2016-2025 Copyright Renault Clio Owners Club