Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Air filter unit: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Apply pressure to (1). Pull at (2). Remove the air breather sleeve (3) from the front end panel. Undo the clip (4) mounting the air filter unit to the motorised throttle valve. Disconnect the oil vapour rebreathing hose

 Fuel tank (filling with fuel)

Useful capacity of fuel tank: approx. 45 litres. The engine 0,9 TCe has a fuel tank capacity of 40 litres or 45 litres (depending on the vehicle). To open cover A, place your finger into recess B. When filling, use the cap holder 1 on the cover A to secure the cap 2. Afte

© 2016-2025 Copyright Renault Clio Owners Club