Renault Clio: Rear Axle Components
- Rubber bush: Adjustment
- Rear brake pads: Removal - Refitting
- Rear brake hose: Removal - Refitting
- Rear brake calliper: Repair
- Rear brake calliper: Removal - Refitting
- Rear brake calliper mounting: Removal - Refitting
- Rear brake disc: Removal - Refitting
- Rear brake lining: Removal - Refitting
- Rear brake cylinder: Removal - Refitting
- Rigid brake pipe: Removal - Refitting
- Shock absorber: Removal - Refitting
- Rear suspension spring: Removal - Refitting
- Rear drum bearing: Removal - Refitting
- Rear disc bearing: Removal - Refitting
- Rear stub axle carrier: Removal - Refitting
- Complete rear axle system: Removal - Refitting
READ NEXT:
Rubber bush: Adjustment
WARNING
Never use the rear axle as support for a lifting system.
ADJUSTMENT
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Release the parking brake.
Remove the rear
Rear brake pads: Removal - Refitting
16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and
ELECTRONIC STABILITY
PROGRAM
When replacing brake pads, be sure to replace the
pads on the opposite side.
WARNING
To avoid damag
Rear brake hose: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
WARNING
Prepare for brake fluid outflow, to p
SEE MORE:
D4F, and 784, and Right-hand Drive
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the dashboard side face (1).
Remove:
the protective strips from the lower cover (2),
the bolts (3),
the lower cover (4), disconnecting the various connectors.
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting
Five-door version
Side lights/brake and direction
indicator lights
Open the boot lid and remove screws 1.
The bulbs are under pressure
and can break when
replaced.
Risk of injury.
To release the light unit, start by moving
the exterior edge away to a sufficient
extent (movement A) t
© 2016-2025 Copyright Renault Clio Owners Club
